UV Coating

UV coating gives your print an extra barrier from the elements and provides protection from sun fade, scratches, and wear and tear. Add this service to an album that you wish to be protected from minor amounts of dirt and endure more handling, or prints that may be framed without glass. UV Coating is a liquid substance that is evenly coated onto the surface of the print and then ‘baked’ into the print using a high temperature UV lamp, protecting your print while sustaining the life of your photographic product. UV Coating can be done on prints up to an 11X20

Styrene

2mm and made out of durable plastic, styrene is an excellent alternative to traditional cardboard mounts. Fiber-based mounting substrates tend to absorb water over time, which leads to bowing or warping. Styrene has no natural fibers, and therefore is not affected by changes in humidity. This means no more warping! As an added bonus, it’s more resistant to edge and corner damage than cardboard mounts, too. Only available in white.

Foam Core

This board is about 1/8” of an inch thick and has a soft white foam core. Foam core should be framed soon after mounting to prevent warping. Kwik foamboard hangers are available for purchase through the ROES software.

Gatorfoam

This substrate is the premier choice for exhibits, signs and even just standard everyday mounting. Gatorfoam board excels when light weight, strength, rigidity and warp resistance are a must! Only available in black and in sizes of 3/16” and 1/2”. Kwik foamboard hangers are available for purchase through the ROES software.

Masonite

These boards are ultra-smooth tempered hard boards that are coated with a permanent, pressure-sensitive adhesive. Recommended for high quality images and fine art photos, this board will not warp. Only available in standard sizes.

Bevel Board

Bevel Mount Boards add elegance and sophistication to any photographic print. A print mounted on Gold or Black Bevel Mount Board becomes a time honored presentation of the highest quality. Bevel Mount Board is about 1/8” thick and is beveled at a 40 degree angle to increase the effect of the colored edge and enhances the appearance of your presentation. Available in metallic gold and black lacquer and 5×7 print size only.

Standout Mount

Standouts are 3/4” and 1-1/2” thick lightweight boards banded with an attractive hard edge. 1 1/2” standout mounts are undersized 1/2” , 3/4” standout mounts are undersized 1/4”. In addition standouts have hanging holes on the back. These mounts come with a finished edge from the factory and they’re only available in black and standard sizes.